an adaptable underfloor power solution

Integrate POWERCONNECT underfloor power into your design & create a solution which adapts to the requirements of a modern workplace.
reduction in costs*
0 %
reduction in labour*
0 %

installations

stop wasting materials & labour

Why split a circuit under the floor, creating multiple penetrations and cable entry points, when we only need one? Bringing the 32A circuit through a single grommet, then distributing to the workstations from the RCBO protected built in sockets, the POWERBOX PDU offers neat efficient distribution, and protection is achieved, with less grommets, less tap-offs, less materials, and saving labour. 2, 4, 6, 8, or 10 outgoing GST connections, cover a variety of situations, with one single in-feed giving a much neater presentation under the workstations.

TEN

workstations
powered

ONE

floor
grommet

A FLEXIBLE ALTERNATIVE

TO BUSBAR WIRING SYSTEMS

HOVER & SLIDE

to compare components

An underfloor bus bar system feeds each desk individually with a 32A tap-off. To power rows of desks, linear runs of busbars feed multiple taps offs via multiple grommets to multiple RCBO’s to multiple desks. Layouts are limited to a linear formations: with little flexibilty for an agile workspace.

POWERCONNECT is a flexible, modular power system. The 32A circuit is brought up through a single grommet -reducing grommets, unsightly cables, labour, carbon & cost!

POWERCONNECT NUMBER CRUNCHING*

MATERIALS

LABOUR

£3562

£458

Cost at November 2022, based on purchase and install of 4 gang power to 34 desks:
6 circuit Home Run feeding PowerConnect Modular Box PowerBox RCBO PDU’s protect 4 gang modules for each workstation. Grommet per group of desks. Labour £31/hour.

BUSBAR NUMBER CRUNCHING

MATERIALS

LABOUR

£5279

£1291

Cost at November 2022, based on purchase and install of 4 gang power to 34 desks:
Armoured cable feeding 5 traditional busbars Tap-off, RCBO, 4 Gang power module per desk. Grommet per 2 users.Labour £31/hour.

What our customers say

“We chose OE’s PowerConnect Modular small power system for many reasons. Not only is it a simple installation, which in turn provides a quicker installation, it provides flexibility for the end user in the future. Every aspect of this product is beneficial and not just for the small power element, the system also reduces floor penetration requirements and material waste. The end product gives a clean, seamless installation under the desks and takes away the untidy look of multiple cables to banks of desks.”

INSIDE CODEMASTER'S

REVAMPED OFFICE

Codemasters, the world-renowned video game developer & publisher integrated POWERCONNECT into their office space. As the POWERCONNECT system is designed to work within such tight spaces, the project was a breeze for both the fitters and the customers.

RETHINKING

power solutions from the ground up.

POWERCONNECT is designed to distribute power sources to every part of the modern office in a cost-effective and flexible format. POWERCONNECT minimises material waste, reduces the carbon footprint of the building & enables a more agile working space – breaking the old rules defined by old technology.

ADD POWER UNITS

TO AGILE WORKSPACES

Are you looking for a complete power solution? POWERCONNECT is simple to integrate with OE power units. Click on the orange dots below to see how you can add power, USB charging & data/AV to your space.

below desk power
and cable management

discreet power solutions
for breakout areas

low profile power solutions 

low profile power solutions 

in desk power solutions 

desktop sockets
and high-power USB  

SEE HOW EASY

AN INSTALL IS

Powering an entire workspace is simple. In this set-up POWERCONNECT links to on-desk power unit – POCO

PATHFINDER

OE’s PATHFINDER system is designed from 25 years experience in supplying cable management products, offering a complete floor to desk, floor to ceiling, or ceiling to desk, vertical cable management solution.

FLAT MDB 6-WAY

6 circuit 6 port outlet boxes. The Home Run cable has a gland and locknut to fix to the Distribution Board header trunking and 3m tails for on site wiring.

FLAT MDB 9-WAY

9 circuit 9 port outlet boxes. The Home Run cable has a gland and locknut to fix to the Distribution Board header trunking and 3m tails for on site wiring.

1 in 7 out SDB

1 in 7 out single circuit underfloor distribution box. Potential applications include desk, grommet and floor box supplies.

CONDUIT

Extenders connect individual circuits from the MDB to the workspaces, functioning like armoured cables but with plug-and-play convenience, saving time on preparation

T-CONNECTOR

Tee connectors are used to connect devices into the circuits. Simply plugged onto or in-between extenders.

FLOORBOX

Floor box, manufactured from galvanized steel, Frame & lid moulded from high impact polycarbonate. Large range of accessory plates.

GROMMETS

Adjustable aperture opening,
Secure Screw clamp installation,
Manufactured from High Grade engineering plastics/ABS

FLAT MDB W/ HOME RUN 10M 6MM2 9-WAY

10M OPEN END EXTENDER LEAD 6MM​2

FLAT MDB W/ HOME RUN 15M 6MM2 6-WAY

Don’t be shy, say hi  

We are excited to hear about your ideas. Drop a line below and our expert team will be in touch. 

share this!